To Create Value For Customers. Integrity and Win-Win.
 |
| Place of Origin: | China |
| Brand Name: | JunQi |
| Certification: | CE |
| Model Number: | DM422D |
| Minimum Order Quantity: | 1 pc |
|---|---|
| Price: | Negotiable |
| Packaging Details: | suite for export package |
| Delivery Time: | as confirmed |
| Payment Terms: | L/C, T/T, Western Union, PAYPAL |
| Supply Ability: | 2000 sets / Month |
| Product Name: | Stepper Motor Driver | Suitable For Motor Type: | 2-phase Stepping Motor 28-57mm |
|---|---|---|---|
| Model: | DM422D | Input Voltage: | 20-40V |
| Peak Current: | 0.5-2.2A | Power Supply: | DC Supply |
| Application: | Automatic Product | ||
| Highlight: | DM422D Hybrid Stepper Driver,20VDC stepper motor and controller,40VDC Hybrid Stepper Driver |
||
DM422D 2 phase stepper motor driver
Features
1. Adopation of 32-bit DSP, pure sine wave subdivision technology
2. Low-noise,low-vibration and low temperature rising
3. Volatge 20-40VDC
4. With 8 stalls output current setting,peak current 2.2A
5. With 4 stalls microstep subbivison setting
6. Aotomatic half current,self test,overr voltage ,under voltage ,over current protection
7. Inernal optical isolation ,highest frequency response 200KHZ
8. Suitable for current 0.5-2.2A 2/4Phase hybrid stepper motor
Current Selection:
| Peak | RMS | SW1 | SW2 | SW3 |
| Default | ON | ON | ON | |
| 0.5A | 0.35A | OFF | ON | ON |
| 0.7A | 0.50A | ON | OFF | ON |
| 1.0A | 0.70A | OFF | OFF | ON |
| 1.3A | 0.90A | ON | ON | OFF |
| 1.6A | 1.20A | OFF | ON | OFF |
| 1.9A | 1.40A | ON | OFF | OFF |
| 2.2A | 1.60A | OFF | OFF | OFF |
Microstep Selection:
| Pulse/Rev | SW6 | SW8 |
| Default | ON | ON |
| 1600 | OFF | ON |
| 3200 | ON | OFF |
| 6400 | OFF | OFF |
Driver Functions Descriptions:
| Driver function | Operating instructions |
|
Output current setting |
Users can set the driver output current by SW1-SW3 three switches. The setting of the specific output current, please refer to the instructions of the driver panel figure. |
|
Microstep setting |
Users can set the driver Microstep by the SW5-SW6 switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure. |
|
Automatic half current function |
Users can set the driver half flow function by SW4. "OFF" indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. "ON" indicates the quiescent current and the dynamic current are the same. User can set SW4 to "OFF", in order to reduce motor and driver heating and improve reliability. |
|
Signal interfaces |
PUL is the setting pulse input; DIR is the stepper motor direction input; OPTO is the power supply for signal port + 5V; ENA is the motor free input. |
|
Motor interfaces |
A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed. |
|
Power interfaces |
It uses DC power supply. Recommended operating voltage is 20VDC-40VDC, and power consumption should be greater than 100W. |
|
Indicator lights |
There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off. |
|
Installation instructions |
Driver dimensions:86×55×20mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation. |
Control Signal and external interface.
| Phenomenon | Reason | Solution |
|
The red indicator is on. |
1.A short circuit of motor wires. | Inspect or change wires |
| 2.The external voltage is over or lower than the driver’s working voltage. | Adjust the voltage to a reasonable rang | |
| 3.Unknown reason | Return the goods |
Mechanical Dimension(mm):
Packing:
Cardboard boxes plus foam packaging. We can also pack the goods according to customer's requirements.
Certificate:
Transportation:
At present, our company supports a variety of modes of transport, or according to customer's needs to choose the mode of transportation.
FAQ:
1.Q: Can I get some samples first?
A: Sure, we are honored to offer you samples for your check.
2.Q: Do you have the products in stock?
A: Our products are manufactured according to your order except the normal products.
3.Q: What's the delivery time?
A: It usually takes about 7 working days,but the exact delivery time might be different for different order or at different time.
4.Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the beginning to the end of the production. Every product will be fully assembled and carefully tested before packed
Contact Person: Ivanzhu
Tel: 0086-13961407941
